por | Jul 22, 2026
Type: Brush Handpiece. Polishing Handpiece 1. With bur or accessory in new collet, thread into handpiece. Place triangular hole in Chuck Wrench over triangular flats of Collet head and tighten the collet clockwise.
por | Jul 22, 2026
Don’t let water in when you are using the handpiece otherwise the handpiece will be rust. It must clean the water out and make it dry then continue to use if water go into to handpiece. Power: 50W. FDA for Handpiece: 510(K) Number: K181900, Regulation Number:...
por | Jul 19, 2026
Power: 50W. When installing the grinding head, the rod of the grinding head must be cleaned and cleaned and then loaded into the chuck. When the handle is used, the handle should not be idling and the grinding pin must be installed.
